Chevy SBC 350 5.7L HP Stage 3 435/455 Lift Cam Camshaft & Lifters Kit Timing

Engine Pro

$243.60
(No reviews yet) Write a Review
SKU:
MC2203CTAGK
Adding to cart… The item has been added

Chevy SBC 350 5.7L HP Stage 3 435/455 Lift Cam Camshaft & Lifters Kit Timing.

 

SBC Camshaft Installation Kit

Included in this set:

  • Engine Pro MC2203 Performance Camshaft
  • EPWI HA817 Hydraulic Lifter Set of (16)
  • ENGINE PRO Adjustable Performance Roller Timing Set 08-3023-3
  • ENGINE PRO Gasket Kit
  • Engine Pro 40-1100 HI-ZINC Liquid Engine Assembly Lube
  • Engine Pro Hi-Zinc Engine Protector #40-1900 (Contains ZDDP)

Please send a "Message to Seller" with the following information:

  1.  What year, make and model is your engine?
  2.  Is your dipstick on the left (drivers side) or right (passenger side)?
  3.  Does your engine use a 2 piece rear main seal?

Engine Pro MC2203 Performance Camshaft

  • Stage: 3
  • Duration @ .050": Intake: 209 Exhaust: 216
  • Advertised Duration: Intake:283 Exhaust: 286
  • Valve Lift: Intake: .435 Exhaust: .455
  • Lobe Separation: Intake: 107 Exhaust: 117
  • Power Range:     1500-4000
  • Idle: Fair
  • Lifter Part #: 817
  • Comment: Good low end torque and pulling power!

General Stage 3 Camshaft Specifications:

  • Idle Quality:   Fair with some lope
  • Torque:  Mid-Range 2400-3200 RPM
  • Fuel Economy:  FAIR 

Recommendations:

  • Towing: Not Recommended
  • Racing: Mild Bracket Racing
  • Computer Controlled Vehicles: Modified computer chip may be required to compensate for low vacuum
  • Transmission: STOCK AUTOMATIC OR MANUAL
  • Compression Ratio: 10.3:1 or less check valve to piston clearance

EPWI HA817 Hydraulic Lifter Set of (16)

We have been using these lifters in our shop for over 30 years with complete confidence and success! "Quality Without Compromise"

ENGINE PRO Adjustable Performance Roller Timing Set 08-3023-3 

  • Adjustable +/- 4 Degrees
  • Top Quality Roller Timing Set

ENGINE PRO Gasket Kit

Depending on what year you specify, you will receive either 30-1000 *fit small block through 1979 w/ left hand dipstick* or 30-1045  *fits thru 1986 with right hand dipstick and two piece rear seal or 30-1016 for small block 400* Gasket Kit. Just let us know what year and engine size you have and we will ship the correct parts! *1986 AND OLDER 2 PIECE REAR SEAL APPLICATIONS ONLY* The 30-1000 gasket set for left hand (drivers side) dipstick will be sent by default if no message is sent at time of checkout!